Doors, joinery and shelving
Commercial carpentry in Melbourne.
Doors and frames, shelving, counters, skirting and trims for shops, showrooms, offices and warehouses. We measure on site, price the job in writing and do the noisy work before you open or after you close.
Tell us about the door, shelf or counter.
Call us on 1300 153 114 or email hello@emerafs.com.au, and we'll book your site visit.
Rough sizes help us plan. We take exact measurements at the site visit.
Before you book
- What to send
- Photos and rough measurements
- Noisy work
- Cutting and drilling done outside opening hours
- What we take on
- Repairs and small fit-out jobs
- Getting materials in
- Tell us where sheets and long lengths can come in
What's included
Maintenance carpentry for shops, offices and warehouses.
Most of the work is repairs on sites that stay open, so we plan the cutting and fitting around your quiet hours.
Commercial door repairs
Timber doors planed and rehung, frames and jambs repaired, and damaged doors and architraves replaced.
Shelving and storage
Shelves, storeroom shelving and cupboards built, refixed or strengthened for the weight they carry.
Counters and display joinery
Shop counters, display units and reception desks repaired, resurfaced or changed to suit a new layout.
Skirting and trims
Skirting boards, architraves and edge trims replaced where trolleys and floor machines have knocked them.
Impact damage
Panels, frames and kick plates hit by forklifts, pallet jacks or trolleys cut out and replaced.
Small layout changes
Non-structural partition walls framed, openings added and shelving moved when a store or office changes its layout.
One contact
Carpentry booked through the team that cleans your site.
If we already clean your store or office, you don't need to find a carpenter. Tell your Emera contact what's broken. We book the carpentry and log the job in the same app as your cleaning.
- Sawdust cleared on the next clean. Our cleaning crew picks up what the repair leaves behind.
- One invoice. Carpentry is billed with your cleaning.
- Photos when it's done. The finished job is photographed and logged for you to sign off.
How a job runs
Measured once, fitted around your trading hours.
You see what's being made, and its price, before anything is cut.
Request a Site Visit- 01
Send photos and sizes
Use the form or call us. Photos and rough sizes let us plan the site visit.
- 02
We measure on site
We measure each opening, shelf or counter, and check the wall and floor it fixes to.
- 03
Written scope and price
Each item is listed with its materials, finish and price, so you know what's being made.
- 04
Fitted around your hours
Cutting and fitting happen before you open, after you close or on a weekend, with the work area screened off.
- 05
Photos and sign-off
We photograph the finished work and log it in our app. You sign it off before it's invoiced.
Checked carpenters and tagged tools before work starts on your site.
Every carpenter we send is checked by us first. Their insurance, WorkCover and any licence the job needs are kept on file, along with the safe work method for power tools.
: Prequalified on Cm3, where independent assessors check a contractor's safety systems, insurances, licences and competencies before it works on a client's site.
: Member of Advanced Safety Systems Australia. Our work health and safety policies, safe work procedures and SWMS are kept on its WHS compliance system.
Police checked
Every carpenter we send to your site, before their first job.
Insured
Public liability and workers compensation for the carpenters on your site.
Tagged power tools
Power tools and leads are tested and tagged before they come on site.
SWMS supplied
Safe work method statements for cutting, power tools and ladders, sent before work starts.
About commercial carpentry
Questions about carpentry on a working site.
What store and office managers ask before booking door, shelving or counter work.
Ask us a questionWhat commercial carpentry work do you do?
Emera does carpentry repairs and small fit-out work on commercial sites, such as doors and frames, shelving and storage, counters and display joinery, skirting and trims, and panels damaged by forklifts or trolleys.
We also make small layout changes, such as framing a non-structural partition wall. Structural and large building work needs a registered builder, and we don't take it on.
Can you repair or replace commercial doors?
Yes. Emera repairs and replaces timber and solid-core doors, frames and architraves, and fixes hinges, closers and locks.
Roller doors, automatic doors and frameless glass doors are specialist work that we don't do. At the site visit, we'll tell you if yours needs a specialist.
Are your tradespeople licensed and insured?
Yes. Each tradesperson Emera sends holds the licence or registration their trade needs in Victoria, and carries public liability insurance and WorkCover.
Our app holds every licence and certificate of currency, and warns us 30 days before one expires. Ask, and we'll send you copies before the job starts. See the checks behind everyone we send.
Can you work before we open or after we close?
Yes. Emera books cleaning and trade work around your opening hours, early in the morning, in the evening or on a weekend, so we stay out of the way of your customers and staff.
If a job needs the power or water off, or makes noise or fumes, we agree the time with you before we book it.
Can one company look after our cleaning and maintenance, and why does that help?
Yes. Emera's crews do the cleaning, and licensed tradespeople we work with do the repairs and trade jobs. Emera books and manages both.
You get one contact, one induction and one record of the work. When a cleaner spots a leaking tap or a broken door closer, it goes in the same report, and we can book the fix.
How do you price trade and maintenance jobs?
Emera prices each trade or maintenance job on what it involves, including labour, materials, access and the time of day the work is done. Small jobs can be priced from your photos, and bigger ones start with a site visit.
You get the scope and price in writing before any work starts. If we find more once we're on site, we stop and agree the extra with you before going on.
Pair with
Finish the job with the same contact.
A handyman for the smaller fixes, a repaint once the carpentry is done, or a maintenance program for the whole site.
Start with a walk around your site.
It's free, and you'll get our honest read on what needs to change at your site, whether or not you go ahead with us.
- 1We call you within one business day to book a time.
- 2We walk the site with you and look at what it needs.
- 3You get a written scope and price to decide on.
or call us 1300 153 114